HP 15-f085wm HP 15 Notebook PC Maintenance and Service Guide - Page 63
Optical drive connector cable
View all HP 15-f085wm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Optical drive connector cable NOTE: The optical drive connector cable is included with the optical drive, spare part number 779456-001. Before removing the optical drive connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Optical drive (see Optical drive on page 34). b. Service door (see Service door on page 30). c. WLAN module (see WLAN module on page 32). d. Memory module (see Memory module on page 31). e. Keyboard (see Keyboard on page 36). f. Top cover (see Top cover on page 42). Remove the optical drive connector cable: 1. Disconnect the optical drive connector cable (1) from the system board. 2. Release the optical drive connector cable from the clip (2) built into the base enclosure. 3. Remove the optical drive connector cable. Component replacement procedures 53