HP 17-x000 17-x099 Models: 17-x100 - 17-x199 - Maintenance and Service Guide - Page 63
TouchPad click board, Disconnect the cables from the TouchPad cable
View all HP 17-x000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
TouchPad click board Description TouchPad click board TouchPad click board cable TouchPad cable Spare part number 858259-001 856606-001 856605-001 Before removing the TouchPad click board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the optical drive (see Optical drive on page 35). 6. Remove the bottom cover (see Bottom cover on page 41). To remove the TouchPad click board: 1. Disconnect the cables from the TouchPad cable (1) and the TouchPad click board cable (2). 2. Remove the two Phillips PM2.0×4.0 screws (3) that secure the TouchPad to the computer. 3. Remove the board (4). Reverse this procedure to install the TouchPad click board. Component replacement procedures 55