HP 2000-2d20ca HP 2000 Notebook PC and Compaq CQ58 Notebook PC - Maintenance a - Page 61
Hard drive, and then lift up
View all HP 2000-2d20ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive cable or bracket. The hard drive cable and bracket are included in the Hard Drive Hardware Kit. Description 750-GB, 5400-rpm 640-GB, 5400-rpm 500-GB, 5400-rpm 320-GB, 5400-rpm Hard Drive Hardware Kit (includes hard drive cable and bracket) Spare part number 634250-001 669300-001 669299-001 622643-001 685089-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the memory module/wireless module compartment cover (see WLAN module on page 48). To remove the hard drive: 1. Loosen the hard drive cover screw (1), and then lift up (2) and remove the cover (3). The hard drive compartment cover is available in the Plastics Kit. For more information about the Plastics Kit, see Plastics kit on page 23. 2. Disconnect the hard drive cable (1) from the system board. ENWW Component replacement procedures 53