HP 2133 HP 2133 Mini-Note PC and HP 2140 Mini-Note PC - Maintenance and Servic - Page 77
Remove the three Torx8 T8M2.0×6.0 screws, the surface of the fan/heat sink
UPC - 884420156444
View all HP 2133 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2. Remove the fan/heat sink (2). NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink and system board components. Thermal grease is used on the video chip (1) and the surface of the fan/heat sink (1) that contacts the video chip. Thermal tape is used on the processor (2) and the surface of the fan/heat sink (2) that contacts the processor. Replacement thermal material is included with all fan/heat sink and system board spare part kits. If you have model 2140, remove the fan/heat sink: 1. Remove the three Torx8 T8M2.0×6.0 screws (1) that secure the fan/heat sink to the system board. Component replacement procedures 69
2.
Remove the fan/heat sink
(2)
.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
and system board components. Thermal grease is used on the video chip
(1)
and the surface of
the fan/heat sink
(1)
that contacts the video chip. Thermal tape is used on the processor
(2)
and
the surface of the fan/heat sink
(2)
that contacts the processor. Replacement thermal material is
included with all fan/heat sink and system board spare part kits.
If you have model 2140, remove the fan/heat sink:
1.
Remove the three Torx8 T8M2.0×6.0 screws
(1)
that secure the fan/heat sink to the system board.
Component replacement procedures
69