HP 220mx HP SureStore 220mx Optical Jukebox User's Guide - Page 24
Connecting the Jukebox with Other SCSI Peripherals
View all HP 220mx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setting up the Jukebox Connecting the Jukebox with Other SCSI Peripherals IMPORTANT Figure 1-5 Although this jukebox connects to a 68-pin SE/LVD "wide" SCSI bus and host adapter, the jukebox and its optical drives use a 50-pin "narrow" SCSI bus internally. See Appendix B for a discussion of SCSI buses. Do not force "wide" data transfers. Connecting the Jukebox With Other SCSI Peripherals The default IDs for the jukebox are as follows. Check to see if there will be any conflicts in this installation. If you are installing another of this model jukebox on the same bus you have conflicts. Autochanger (jukebox robotics) = 3 Drive 1 = 4 Drive 2 = 5 (if installed) 1-12 Chapter 1
1-12
Chapter 1
Setting up the Jukebox
Connecting the Jukebox with Other SCSI Peripherals
IMPORTANT
Although this jukebox connects to a 68-pin SE/LVD
“
wide
”
SCSI bus and
host adapter, the jukebox and its optical drives use a 50-pin
“
narrow
”
SCSI bus internally. See Appendix B for a discussion of SCSI buses.
Do not force
“
wide
”
data transfers.
Figure 1-5
Connecting the Jukebox With Other SCSI Peripherals
The default IDs for the jukebox are as follows.
Check to see if there will be
any conflicts in this installation. If you are installing another of this
model jukebox on the same bus you have conflicts.
Autochanger (jukebox robotics) = 3
Drive 1 = 4
Drive 2 = 5 (if installed)