HP 220mx HP SureStore 220mx Optical Jukebox User's Guide - Page 55
Table 3-1, Configurations, Number, Function, Default, Settings - service manual
View all HP 220mx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Operating the Jukebox Operating the Jukebox Using the Front Panel Features displays. NO CONFIG displays if you choose an invalid number. 4. Press ENTER. The current default setting displays. It may be any one of these settings • OFF or ON • a number 5. Select the option you want by pressing NEXT or PREV. 6. Press ENTER. SET displays. The security option is set. 7. Press CANCEL to return to READY. CAUTION The next step is to turn the jukebox to STANDBY. Do not turn power to STANDBY in this jukebox until you are sure the SCSI bus is inactive. Removing power from a SCSI peripheral when the bus is active can result in data loss and/or indeterminate bus states. Check your host system manuals for information about checking the SCSI bus status. Table 3-1 1. Turn the jukebox to STANDBY, then ON to save the code to the jukebox memory. Configurations Number 0-14 15 16 Function Default Settings Used by service personnel only. Changing these configurations may result in an inoperable jukebox. Enables or Off prevents manual disk removal. On - disks cannot be loaded or ejected. Off - disks can be loaded and ejected. Requires entering the current security code. Set default configurations Save Clear - restores default configurations immediately. Save - maintains all set configurations. Chapter 3 3-17