HP 2210b HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 46
Hard drive, Lift the rear edge of the hard drive cover
View all HP 2210b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Hard drive NOTE: All hard drive spare part kits include a hard drive bracket. Description 200-GB, 4200-rpm hard drive 160-GB, 5400-rpm hard drive 120-GB, 5400-rpm hard drive 80-GB, 5400-rpm hard drive Spare part number 454338-001 454337-001 454336-001 454335-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the four Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the computer. 3. Lift the rear edge of the hard drive cover (2), swing it up and forward, and remove the cover. The hard drive cover is included in the Plastics Kit, spare part number 454010-001. 4. Loosen the Phillips PM2.5×12.0 captive screw (1) that secures the hard drive to the computer. 38 Chapter 4 Removal and replacement procedures