HP 2730p HP EliteBook 2730p Notebook PC - Maintenance and Service Guide - Page 46

Hard drive, Loosen the six Phillips PM2.0×5.0 captive screws

Get HP 2730p - EliteBook - Core 2 Duo 1.86 GHz PDF manuals and user guides
UPC - 884420401063
View all HP 2730p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Removal and replacement procedures Hard drive ✎ The hard drive spare part kit includes a hard drive bracket, hard drive isolator, and hard drive connector cable. Description 120-GB, 5400-rpm, 1.8-inch hard drive 80-GB, 5400-rpm, 1.8-inch hard drive 80-GB solid-state drive Hard drive connector cable Spare part number 501490-001 501491-001 501492-001 504519-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-8). 5. Remove the SIM (see "SIM" on page 4-9). Remove the hard drive: 1. Loosen the six Phillips PM2.0×5.0 captive screws that secure the hard drive cover to the computer. 2. Lift the rear edge of the hard drive cover until it rests at an angle, and then remove the hard drive cover. The hard drive cover is included in the Plastics Kit, spare part number 501499-001. 4-10 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
4–10
Maintenance and Service Guide
Removal and replacement procedures
Hard drive
✎
The hard drive spare part kit includes a hard drive bracket, hard drive isolator, and hard drive connector cable.
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-8
).
5. Remove the SIM (see
“SIM” on page 4-9
).
Remove the hard drive:
1. Loosen the six Phillips PM2.0×5.0 captive screws
that secure the hard drive cover to the computer.
2. Lift the rear edge of the hard drive cover
until it rests at an angle, and then remove the hard drive cover.
The hard drive cover is included in the Plastics Kit, spare part number 501499-001.
Description
Spare part number
120-GB, 5400-rpm, 1.8-inch hard drive
501490-001
80-GB, 5400-rpm, 1.8-inch hard drive
501491-001
80-GB solid-state drive
501492-001
Hard drive connector cable
504519-001