HP 2730p HP EliteBook 2730p Notebook PC - Maintenance and Service Guide - Page 72
Modem module, Hinge cover see
UPC - 884420401063
View all HP 2730p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Removal and replacement procedures Modem module ✎ The modem module spare part kit includes a modem module cable. Description For use only in Australia and New Zealand For use in all countries and regions except Australia and New Zealand Spare part number 461750-011 461750-001 Before removing the modem module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-8). 5. Remove the following components: a. SIM (see "SIM" on page 4-9) b. Hard drive cover (see "Hard drive" on page 4-10) c. Keyboard (see "Keyboard" on page 4-17) d. Hinge cover (see "Hinge cover" on page 4-20) e. Top cover (see "Top cover" on page 4-21) f. Display assembly (see "Display assembly" on page 4-27) g. System board (see "System board" on page 4-30) Remove the modem module: 1. Turn the system board upside down, with the RJ-11 and RJ-45 jacks toward you. 2. Remove the two Phillips PM2.5×4.0 screws that secure the modem module to the system board. 3. Lift the modem module straight up to disconnect it from the system board. 4. Disconnect the modem module cable from the modem module. 5. Remove the modem module. Reverse this procedure to install the modem module. 4-36 Maintenance and Service Guide