HP 2730p HP EliteBook 2730p Notebook PC - Maintenance and Service Guide - Page 56

Hinge cover, Remove the hinge cover by pulling it away from the computer.

Get HP 2730p - EliteBook - Core 2 Duo 1.86 GHz PDF manuals and user guides
UPC - 884420401063
View all HP 2730p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Removal and replacement procedures Hinge cover ✎ The hinge cover is included in the Plastics Kit, spare part number 501499-001. Before removing the hinge cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-8). 5. Remove the following components: a. SIM (see "SIM" on page 4-9) b. Hard drive cover (see "Hard drive" on page 4-10) c. Keyboard (see "Keyboard" on page 4-17) Remove the hinge cover: 1. Turn the computer upside down, with the rear panel toward you. 2. Remove the two Torx T8M2.0×5.0 screws that secure the hinge cover to the computer. 3. Turn the computer right-side up, with the rear panel toward you. 4. Raise the display to an upright position. 5. Remove the hinge cover by pulling it away from the computer. Reverse this procedure to install the hinge cover. 4-20 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
4–20
Maintenance and Service Guide
Removal and replacement procedures
Hinge cover
✎
The hinge cover is included in the Plastics Kit, spare part number 501499-001.
Before removing the hinge cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-8
).
5. Remove the following components:
a.
SIM (see
“SIM” on page 4-9
)
b.
Hard drive cover (see
“Hard drive” on page 4-10
)
c.
Keyboard (see
“Keyboard” on page 4-17
)
Remove the hinge cover:
1. Turn the computer upside down, with the rear panel toward you.
2. Remove the two Torx T8M2.0×5.0 screws that secure the hinge cover to the computer.
3. Turn the computer right-side up, with the rear panel toward you.
4. Raise the display to an upright position.
5. Remove the hinge cover by pulling it away from the computer.
Reverse this procedure to install the hinge cover.