HP 4400 HP Enterprise Virtual Array Updating Product Software Guide (XCS 10000 - Page 65

Task checklist, Table 8 Upgrade task checklist

Get HP 4400 PDF manuals and user guides View all HP 4400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Task checklist Use the following checklist to track your progress and mark when a task is completed. Table 8 Upgrade task checklist Task "Step 1. Checking the health of the Enterprise Virtual Array" (page 43) Time required: 20-30 minutes Task complete "Step 2. Configure User-Initiated Service Mode (UISM)" (page 45) Time required: 10-15 minutes "Step 3. Disabling array passwords" (page 46) Time required: 10-15 minutes "Step 4. Halting all host access to the array for an offline upgrade " (page 46) Time required: Varies by host; must be performed for each host accessing the array "Step 5. Upgrading the controller software " (page 47) Time required: 25-30 minutes "Step 6. Upgrading the disk drive firmware" (page 57) Time required: Varies depending on the number of disk drives to be upgraded. It can take from 30 seconds to 3.5 minutes per drive. "Step 7. Entering array passwords" (page 62) Time required: 10-15 minutes "Step 8. Resuming array operation" (page 63) Time required: Varies with your configuration. Task checklist 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Task checklist
Use the following checklist to track your progress and mark when a task is completed.
Table 8 Upgrade task checklist
Task complete
Task
“Step 1. Checking the health of the Enterprise Virtual Array” (page 43)
Time required:
20–30 minutes
“Step 2. Configure User-Initiated Service Mode (UISM)” (page 45)
Time required:
10–15 minutes
“Step 3. Disabling array passwords” (page 46)
Time required:
10–15 minutes
“Step 4. Halting all host access to the array for an offline upgrade ” (page 46)
Time required:
Varies by host; must be performed for each host accessing the array
“Step 5. Upgrading the controller software ” (page 47)
Time required:
25–30 minutes
“Step 6. Upgrading the disk drive firmware” (page 57)
Time required:
Varies depending on the number of disk drives to be upgraded. It can take from
30 seconds to 3.5 minutes per drive.
“Step 7. Entering array passwords” (page 62)
Time required:
10–15 minutes
“Step 8. Resuming array operation” (page 63)
Time required:
Varies with your configuration.
Task checklist
65