HP 4700n Service Manual - Page 500

Item DUPLEX Options Off On* DUPLEX BINDING Values SHORT EDGE* LONG EDGE OVERRIDE A4/LETTER NO YES* MANUAL FEED Off* On COURIER FONT REGULAR* DARK WIDE A4 NO* YES PRINT PS ERRORS Off* 480 Chapter 7 Troubleshooting Explanation Set the value to On to print on both sides (duplex) or Off to print on one side (simplex) of a sheet of paper. DUPLEX BINDING allows you to select LONG EDGE or SHORT EDGE. This item displays only if DUPLEX is set to On. This command is used to print on Letter-size media when an A4 job is sent but no A4-size media is loaded in the printer (or to print on A4-size media when a Letter job is sent, but no Letter-size media is loaded in the printer). Feed the paper manually from Tray 1, rather than automatically from a tray. When MANUAL FEED=ON and Tray 1 is empty, the printer goes offline when it receives a print job. It then displays MANUALLY FEED . Select the version of Courier font to use: REGULAR: The internal Courier font available on the HP LaserJet 4 series printers. DARK: The internal Courier font available on the HP LaserJet III series printers. Both fonts are not available at the same time. The Wide A4 setting changes the number of characters that can be printed on a single line of A4 paper. YES: Up to 80 10-pitch characters can be printed on one line. NO: Up to 78 10-pitch characters can be printed on one line. Select On to print the PS error page when PS errors occur. ENWW