HP 5000gn Service Manual - Page 142
cord. Turn the printer on and test - laserjet memory
View all HP 5000gn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
6 Slide the formatter board back into the printer and tighten the two screws. 7 If an optional duplexer is installed, reattach the cable tray and the rear section of the duplexer. Reattach any interface cables and the power cord. Turn the printer on and test the DIMM. Note Single in-line memory modules (SIMMs) used on previous HP LaserJet printers are not compatible with the printer. EN User Installable Accessories 6-3
EN
User Installable Accessories
6-3
6
Slide the formatter board back into
the printer and tighten the two
screws.
7
If an optional duplexer is installed,
reattach the cable tray and the rear
section of the duplexer. Reattach
any interface cables and the power
cord. Turn the printer on and test
the DIMM.
Note
Single in-line memory modules (SIMMs)
used on previous HP LaserJet printers
are not compatible with the printer.