HP 5000gn Service Manual - Page 179
Formatter Assembly
View all HP 5000gn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Formatter Assembly 1 Print a Configuration Page, if possible, to use as a reference when reinstalling the new formatter. 2 Remove any EIO accessories from the EIO slots. 3 Facing the back of the printer, loosen the two thumbscrews and slide the Formatter Assembly out. 4 Remove any DIMMs from the DIMM slots. Figure 6-31 Formatter Assembly Hint After reinstalling the formatter, update the printer configuration if necessary, comparing the configuration to the Configuration page printed in step 1. 6-40 Removing and Replacing Parts EN
6-40
Removing and Replacing Parts
EN
Formatter Assembly
1
Print a Configuration Page, if possible, to use as a reference
when reinstalling the new formatter.
2
Remove any EIO accessories from the EIO slots.
3
Facing the back of the printer, loosen the two thumbscrews and
slide the Formatter Assembly out.
4
Remove any DIMMs from the DIMM slots.
Figure 6-31
Formatter Assembly
Hint
After reinstalling the formatter, update the printer configuration if
necessary, comparing the configuration to the Configuration page
printed in step 1.