HP 5000gn Service Manual - Page 157
Front Cover and Tray 1
View all HP 5000gn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Front Cover and Tray 1 Front Cover and Tray 1 must be removed individually. See Figure 6-10. 1 Open the Front Cover door. 2 Disengage the Tray 1 Guide pins from inside the Front Cover by pushing the Guides (C) outward. The Cover and Tray 1 will be separated. Press Tray 1 Guide against the printer. Figure 6-10 Front Cover Item A B C Explanation Front Cover Tray 1 Guide Guides 3 Release the Front Cover, allowing it to pivot freely on its keyed pins. The Tray will slide off the pins to the right at its lowest position. 6-18 Removing and Replacing Parts EN
6-18
Removing and Replacing Parts
EN
Front Cover and Tray 1
Front Cover and Tray 1 must be removed individually. See Figure
6-10.
1
Open the Front Cover door.
2
Disengage the Tray 1 Guide pins from inside the Front Cover by
pushing the Guides (C) outward. The Cover and Tray 1 will be
separated. Press Tray 1 Guide against the printer.
Figure 6-10
Front Cover
3
Release the Front Cover, allowing it to pivot freely on its keyed
pins. The Tray will slide off the pins to the right at its lowest
position.
Item
Explanation
A
Front Cover
B
Tray 1 Guide
C
Guides