HP 5000gn Service Manual - Page 154
Control Panel Overlay and Control Panel
View all HP 5000gn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Control Panel Overlay and Control Panel 1 Remove the Top Cover (page 6-12). 2 The Control Panel Overlay is held in place on the Top Cover by two tabs on each side. Slide a small flat-blade screwdriver along the outside edge of the Control Panel Overlay, to disengage the two tabs on the outside of the cover. 3 Lift the Overlay off of the Control Panel. Figure 6-7 Releasing Control Panel Overlay 4 Remove the single self-tapping screw holding the Control Panel to the underside of the Top Cover. 5 Lift up on the metal plate gently to free the Control Panel. 6 Grasp the Control Panel by the metal frame and remove it from the underside of the Top Cover. See Figure 6-8, "Back Side of Top Cover," on page 6-16. EN Removing Covers 6-15
EN
Removing Covers
6-15
Control Panel Overlay and Control Panel
1
Remove the Top Cover (page 6-12).
2
The Control Panel Overlay is held in place on the Top Cover by
two tabs on each side. Slide a small flat-blade screwdriver along
the outside edge of the Control Panel Overlay, to disengage the
two tabs on the outside of the cover.
3
Lift the Overlay off of the Control Panel.
Figure 6-7
Releasing Control Panel Overlay
4
Remove the single self-tapping screw holding the Control Panel
to the underside of the Top Cover.
5
Lift up on the metal plate gently to free the Control Panel.
6
Grasp the Control Panel by the metal frame and remove it from
the underside of the Top Cover. See Figure 6-8, “Back Side of Top
Cover,” on page 6-16.