HP 5000gn Service Manual - Page 181
Tray 2 Roller
View all HP 5000gn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Tray 2 Roller 1 Remove the Paper Tray, and tilt the printer backwards, with the front of the printer facing up. 2 Depress the tab (A) on the right side cam, and slide the cam and the bushing to the right. 3 Rotate the D-Roller 180o and remove it from the shaft. Figure 6-33 Tray 2 Roller (bottom view of printer) Item A B C Explanation Tab is behind this cam. Cam Bushings Hint To reassemble the roller, orient the pin on the D-Roller so that it lines up with the hole on the right side cam. Slide the cam toward the Roller until the tab snaps into place. 6-42 Removing and Replacing Parts EN
6-42
Removing and Replacing Parts
EN
Tray 2 Roller
1
Remove the Paper Tray, and tilt the printer backwards, with the
front of the printer facing up.
2
Depress the tab (A) on the right side cam, and slide the cam and
the bushing to the right.
3
Rotate the D-Roller 180
o
and remove it from the shaft.
Figure 6-33
Tray 2 Roller (bottom view of printer)
Hint
To reassemble the roller, orient the pin on the D-Roller so that it lines
up with the hole on the right side cam. Slide the cam toward the Roller
until the tab snaps into place.
Item
Explanation
A
Tab is behind this cam.
B
Cam
C
Bushings