HP 5000gn Service Manual - Page 189
Paper Feed Belt Assembly
View all HP 5000gn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Paper Feed Belt Assembly 1 Remove the Top Cover (page 6-12), Left Cover (page 6-23), and Main Gear Assembly (page 6-34), DC Controller (page 6-46), and Transfer Roller Assembly (page 6-28). 2 Facing the front of the printer, remove the machine screws on each side of the Belt Assembly. 3 Raise the Registration Assembly by the small green handle, and lift out the Belt Assembly. 4 Remove the plastic guide (A) in Figure 6-41 and replace the belts if necessary. The guide snaps back in after belt replacement. . Figure 6-40 Paper Feed Belt Assembly Item A Explanation Paper Feed Belt Assembly Screws 6-50 Removing and Replacing Parts EN
6-50
Removing and Replacing Parts
EN
Paper Feed Belt Assembly
1
Remove the Top Cover (page 6-12), Left Cover (page 6-23), and
Main Gear Assembly (page 6-34), DC Controller (page 6-46), and
Transfer Roller Assembly (page 6-28).
2
Facing the front of the printer, remove the machine screws on
each side of the Belt Assembly.
3
Raise the Registration Assembly by the small green handle, and
lift out the Belt Assembly.
4
Remove the plastic guide (A) in Figure 6-41 and replace the belts
if necessary. The guide snaps back in after belt replacement.
.
Figure 6-40
Paper Feed Belt Assembly
Item
Explanation
A
Paper Feed Belt Assembly Screws