HP 5000gn Service Manual - Page 187
HP 5000gn - LaserJet B/W Laser Printer Manual
View all HP 5000gn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Figure 6-38 DC Controller Assembly (long screws) Item A Explanation Long Screws 5 Remove the two screws (A) (Figure 6-38) located at the back of the DC Controller Assembly, inside the chassis. These are long screws; their position requires the use of a magnetized screwdriver. 6 Facing the rear of the printer, remove the two spring-loaded machine screws closest to the ground wire removed in step 4 above. Remove the spring-loaded machine screw closest to you on the right side. 7 Slide the DC Controller Assembly out of the rear of the chassis. 6-48 Removing and Replacing Parts EN
6-48
Removing and Replacing Parts
EN
Figure 6-38
DC Controller Assembly (long screws)
5
Remove the two screws (A) (Figure 6-38) located at the back of
the DC Controller Assembly, inside the chassis. These are long
screws; their position requires the use of a magnetized
screwdriver.
6
Facing the rear of the printer, remove the two spring-loaded
machine screws closest to the ground wire removed in step 4
above. Remove the spring-loaded machine screw closest to you
on the right side.
7
Slide the DC Controller Assembly out of the rear of the chassis.
Item
Explanation
A
Long Screws