HP 6100 HP 4x00/6x00/8x00 Enterprise Virtual Array User Guide (5697-0733, Marc - Page 139
en.11 NONCRITICAL condition—I/O module NVRAM write, Host conditions
![]() |
View all HP 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
1. Record all six characters of the condition report. 2. Observe the I/O module status indicators for an operational display. 3. Contact your HP-authorized service representative. 8.7.en.11 NONCRITICAL condition-I/O module NVRAM write The system is unable to write data to the I/O module NVRAM. Complete the following procedure to correct this problem: 1. Record all six characters of the condition report. 2. Observe the I/O module status indicators for an operational display. 3. Contact your HP-authorized service representative. 8.7.en.12 NONCRITICAL condition-I/O Module NVRAM read failure The system is unable to read data from the I/O module NVRAM. Complete the following procedure to correct this problem: 1. Record all six characters of the condition report. 2. Contact your HP-authorized service representative. 8.7.en.13 NONCRITICAL condition-I/O module removed The system detects that an I/O module has been removed. To correct the problem, install an I/O module. Host conditions The EMU has the capability of displaying host controller defined condition reports on the EMU alphanumeric display. The format of a host condition report is F.F.en.ec, where: • F.F. is the host element type number • en. is the two-character host element number • ec is the error code The host controller can display host controller defined error codes on the EMU alphanumeric display Correcting errors 139
![](/manual_guide/products/hewlettpackard-6100-hp-4x006x008x00-enterprise-virtual-array-user-guide-56970733-2011-9c4f22a/139.png)