HP 6820s HP Compaq 6820s Notebook PC - Maintenance and Service Guide - Page 44

Hard drive, Lift the right side of the hard drive bay cover

Page 44 highlights

Hard drive NOTE: All hard drive spare part kits include a hard drive bracket. Description 250-GB, 5400-rpm hard drive 160-GB, 5400-rpm hard drive 120-GB, 5400-rpm hard drive 80-GB, 5400-rpm hard drive Spare part number 457613-001 457014-001 457013-001 457012-001 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive bay cover to the computer. 3. Lift the right side of the hard drive bay cover (2), swing it to left, and remove the cover. The hard drive bay cover is included in the Plastics Kit, spare part number 456614-001. 4. Loosen the Phillips PM2.5×13.0 captive screw (1) that secures the hard drive to the computer. 36 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147

Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
Spare part number
250-GB, 5400-rpm hard drive
457613-001
160-GB, 5400-rpm hard drive
457014-001
120-GB, 5400-rpm hard drive
457013-001
80-GB, 5400-rpm hard drive
457012-001
Before disassembling the computer, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery
on page
35
).
Remove the hard drive:
1
.
Position the computer with the front toward you.
2
.
Loosen the two Phillips PM2.0×5.0 captive screws
(1)
that secure the hard drive bay cover to the
computer.
3
.
Lift the right side of the hard drive bay cover
(2)
, swing it to left, and remove the cover. The hard
drive bay cover is included in the Plastics Kit, spare part number 456614-001.
4
.
Loosen the Phillips PM2.5×13.0 captive screw
(1)
that secures the hard drive to the computer.
36
Chapter
4
Removal and replacement procedures