HP 7650 User's Manual - Page 17
Load negatives into the TMA light source - scanjet negative scanner
UPC - 829160621579
View all HP 7650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 3 Note Make sure that the shiny side of the slide faces the scanner glass when the TMA light source is in position on the scanner glass. (The emulsion side is dull.) 2 If you are scanning fewer than three slides, insert the slide light shield after you load the last slide. Insert a slide into the slide holder with a slide light shield Load negatives into the TMA light source 1 Load a negative strip into the negative holder. The negative holder is normally stored in the TMA light source, within the slide holder. Note Make sure that the shiny side of the negative faces the scanner glass when the TMA light source is in position on the scanner glass. Caution Negatives are easily damaged. Touch them only on their edges. 2 If you are scanning a negative strip with fewer than four frames, insert the negative light shield after you load the negative strip. Use the arrow icons on the negative light shield to position it correctly. 3 Load the negative strip into the negative holder. 4 Slide the negative holder into the slide holder on the bottom side of the TMA light source. 14 HP Scanjet 7600 series scanner