HP 9000 rp7440 nPartition Administrator's Guide, Second Edition - Page 233
Details, Show Complex Details, I/O Chassis, Show Details, Log off parmgr
View all HP 9000 rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
Procedure 8-17 Listing Input/Output (I/O) Configurations (nPartition Commands) From the command line, use the parstatus -I command to list details about all I/O chassis in the server complex. From HP-UX B.11.11 use the rad -q command, or from HP-UX B.11.23 and HP-UX B.11.31 use the olrad -q command, to list details about PCI cards and slots in the local nPartition. 1. Login to a system with the nPartition commands installed. If using remote administration features, you can login to any system with Enhanced nPartition Commands installed. If listing I/O chassis status (using parstatus -I) you can login to any nPartition in the complex or remotely list details. To list details about the cards and slots in an I/O chassis you must login to the nPartition to which the cell connected to the I/O chassis is assigned. 2. Issue the commands to list details about I/O chassis and PCI slots. • parstatus -I - List details about all I/O chassis in the server complex, including the usage (absent, active, inactive), whether the chassis has Core I/O, and which cell the I/O chassis is connected to. • rad -q - HP-UX B.11.11 only. Displays the status of all PCI card slots in the system. Includes details about each PCI card slot, HP-UX Hardware Paths, and power and driver status. • olrad -q - HP-UX B.11.23 and HP-UX B.11.31. Displays the status of all PCI card slots in the system. Includes details about each PCI card slot, HP-UX Hardware Paths, and power and driver status. Procedure 8-18 Listing Input/Output (I/O) Configurations (Partition Manager) You can list the I/O configuration for a server complex or any nPartition in the complex by using Partition Manager. When using Partition Manager Version 1.0, select the Details→Show Complex Details action, then select the I/O Chassis tab. When using Partition Manager Version 2.0, select the I/O tab. 1. Access Partition Manager. For details on accessing Partition Manager or other tools, see "Tools for Listing Status" (page 223). 2. List I/O configuration details for the server complex. From Partition Manager Version 1.0, select the Details→Show Complex Details action, then select the I/O Chassis tab to view I/O chassis details for the complex. For additional details on any I/O chassis, use the Show Details button to display a list of PCI slots and cards. From Partition Manager Version 2.0, select the I/O tab to view details about the I/O chassis in the complex. You can view further details about individual cards by clicking on the card or by selecting the card(s) and using actions available from the I/O menu. Viewing these additional details requires running pdweb (the HP-UX Peripheral Device tool) on the local nPartition to which the cell connected to the I/O chassis is assigned. 3. Exit Partition Manager. From Partition Manager Version 1.0, select the File→Exit action. From Partition Manager Version 2.0, select Log off parmgr or exit the Web browser when finished. Listing Input/Output (I/O) Configurations 233