HP 9000 rp7440 nPartition Administrator's Guide, Second Edition - Page 238
Listing Power Status and Power Supplies
View all HP 9000 rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
4. Exit the console and service processor interfaces if finished using them. To exit the BCH environment type ^B (Control-B); this exits the nPartition console and returns to the service processor Main Menu. To exit the service processor, type X at the Main Menu. Procedure 8-30 Listing the Local nPartition Number (EFI Shell) From the EFI Shell, use the info sys command to list the local nPartition number; this command also displays a list of active cells, CPUs, and the current memory configuration. The EFI Shell is available only on HP Integrity systems. 1. Access the EFI Shell environment for the nPartition whose nPartition number you want to list. Login to the service processor (MP or GSP) and enter CO to access the Console list. Select the nPartition console. When accessing the console, confirm that you are at the EFI Boot Manager menu (the main EFI menu). If at another EFI menu, select the Exit option from the sub-menus until you return to the screen with the EFI Boot Manager heading. From the EFI Boot Manager menu, select the EFI Shell menu option to access the EFI Shell environment. 2. Enter the info sys command to list the nPartition number for the local nPartition. The info sys command also displays a list of active cells, CPUs, and the current memory configuration. 3. Exit the console and service processor interfaces if finished using them. To exit the EFI environment type ^B (Control-B); this exits the nPartition console and returns to the service processor Main Menu. To exit the service processor, type X at the Main Menu. Procedure 8-31 Listing the Local nPartition Number (nPartition Commands) From the command line, issue the parstatus -w command to list the local nPartition number. 1. Login to a system with the nPartition commands installed. If using remote administration features to list a local nPartition number, you can login to any system with Enhanced nPartition Commands installed. Only remote management using WBEM involves remote management on a local nPartition. Remote management using IPMI over LAN does not support listing a local nPartition number, because the remote access point is the service processor (MP or GSP) of a remote complex. 2. Issue the parstatus -w command to list the local nPartition number. Listing Power Status and Power Supplies You can list power status and power supply details by using any one of the following procedures: • "Listing Power Status and Power Supplies (Service Processor)" (page 238) • "Listing Power Status and Power Supplies (nPartition Commands)" (page 239) • "Listing Power Status and Power Supplies (Partition Manager)" (page 239) Power status and power supply information includes the power status (on or off) for cabinets, cells, and I/O chassis; the status (ok or failed) for power supplies; and related details. Procedure 8-32 Listing Power Status and Power Supplies (Service Processor) From the service processor Command Menu, use the PS command and the cabinet option to list power status and power supply details for the specified cabinet. 1. Login to the service processor (MP or GSP) and enter CM to access the Command Menu. 238 Listing nPartition and Hardware Status