HP A7518B HP StorageWorks SDLT Tape Drive Getting Started Guide - internal mod - Page 42

How should the SCSI bus be terminated? Description Further information It is unclear if the bus is already terminated Both ends of a SCSI bus must be terminated. or where an additional terminator should Typically, when connecting an internal drive to the be placed. ribbon cable already inside your server then both the host bus adapter and the end of the ribbon cable will already be terminated and no further action is required. Refer also to the "SCSI Configuration" section in the online User's Guide on the HP StorageWorks Tape CD-ROM. Is the correct SCSI host bus adapter installed? Description Further information The server already has a SCSI host bus adapter but it is difficult to determine what type it is. If your server is in its original configuration (no SCSI adapters have been added or removed) then use www.hp.com/go/connect to check the compatibility of your system. You can also check the SCSI configuration from the boot-up screen or from the Windows Control Panel, or by using HP Library & Tape Tools (see page 33). The server may not have a SCSI host bus adapter installed. Use HP Library & Tape Tools (see page 33) to check whether you have a SCSI host adapter on your system. If not, you will need to purchase one. Refer to the ordering supplies section in the online User's Guide on the HP StorageWorks Tape CD-ROM. 38