HP AE370A Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 75
To set all DH groups to be specified in the authentication negotiation in the order of 0
UPC - 882780362611
View all HP AE370A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
authUtil 2 authinit [slotnumber/]portnumber [, [slotnumber]/portnumber...| allE Re-initiates authentication on selected ports after changing the DH-CHAP group, hash type, and shared secret between a pair of switches. This command does not work on Private, Loop, NPIV and FICON devices. The command can re-initiate authentication only if the device was previously authenticated. This command may bring down the E_Ports if the DH-CHAP shared secrets are not installed correctly. Valid options include: slotnumber Specify the slot number, if applicable, followed by a slash (/). portnumber Specify the port number. On enterprise-class platforms, use the slotnumber/portnumber format for specifying the port number. allE Specify all E_Ports in the switch. Examples To display authentication configuration on the switch: switch:admin> authutil --show AUTH TYPE HASH TYPE GROUP TYPE fcap,dhchap sha1,md5 0,1,2,3,4 Switch Authentication Policy: PASSIVE Device Authentication Policy: OFF To set DH-CHAP as the authentication protocol: switch:admin> authutil --set -a dhchap Authentication is set to dhchap. To set both protocols in order of FCAP and then DH-CHAP: switch:admin> authutil --set -a all Authentication is set to fcap,dhchap. To set DH group 3: switch:admin> authutil --set -g 3 DH Group was set to 3. To set all DH groups to be specified in the authentication negotiation in the order of 0, 1, 2, 3, and 4: switch:admin> authutil --set -g "*" DH Group is set to 0,1,2,3,4 To set the Switch policy to active mode: switch:admin> authutil --policy -sw active Warning: Activating the authentication policy requires either DH-CHAP secrets or PKI certificates depending on the protocol selected. Otherwise, ISLs will be segmented during next E-port bring-up. ARE YOU SURE (yes, y, no, n): [no] y Auth Policy is set to ACTIVE Fabric OS Command Reference 47 53-1001186-01