HP AE370A Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 791
switchDisable, disabled. To disable the entire chassis, use
UPC - 882780362611
View all HP AE370A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 791 highlights
switchDisable 2 switchDisable Disables all user ports on a switch. Synopsis switchdisable Description Use this command to disable all user ports on a switch. All Fibre Channel ports are taken offline. If the switch was part of a fabric, the remaining switches reconfigure. As each port is disabled, the front panel LED changes to a slow flashing yellow. The switch must be disabled before making configuration changes or before running offline diagnostic tests. Commands that require the switch to be disabled generate an error message if invoked while the switch is enabled. It is not necessary to disable the switch before rebooting or powering off. When this command is executed on a logical switch, only the ports allocated to the logical are disabled. To disable the entire chassis, use the chassisDisable command. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details Operands none Examples To disable the switch: switch:admin> switchdisable See Also bladeEnable, bladeDisable, chassisEnable, chassisDisable, switchCfgPersistentDisable, switchCfgPersistentEnable, switchEnable, switchShow Fabric OS Command Reference 763 53-1001186-01