HP BladeSystem c3000 HP BladeSystem Deployment Guide for Solutions with 6Gb SA - Page 75
MDS600 and D6000disk enclosure port information, Top I/O module: Primary I/O module
View all HP BladeSystem c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
MDS600 and D6000disk enclosure port information The MDS600 and D6000 have two drawers that contain drives. From the front of the device, drawer number one is on the left of the device; from the rear of the device, drawer number 1 is on the right. As shown in the following illustration: • I/O modules: Each drawer can support two I/O modules. ◦ Top I/O module: Primary I/O module ◦ Bottom I/O module: Secondary I/O module • SAS Ports: Each I/O module has two SAS ports. Use these SAS ports to connect to 6Gb SAS BL switches. The SAS ports are referred to as follows: ◦ Bottom SAS port: port 1 ◦ Top SAS port: port 2 1. Primary I/O module (drawer 2) 2. Primary I/O module (drawer 1) 3. Secondary I/O module (drawer 1) 4. Secondary I/O module drawer 2) Device SAS port information 75