HP BladeSystem c3000 HP BladeSystem Deployment Guide for Solutions with 6Gb SA - Page 85
MDS600 and D6000 single domain, standard cabling, For consistency across all deployments
View all HP BladeSystem c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
MDS600 and D6000 single domain, standard cabling This example illustrates standard cabling for a single-domain configuration. In this configuration, note the following: • One cable from the MDS600 or D6000 storage drawer to the switch offers single-domain connectivity. For dual-domain support, an additional I/O module must be installed in the storage drawer and connected to the switch. • The cable is connected to the primary I/O module, SAS port 1. • For consistency across all deployments, even though SAS port 1 and SAS port 2 are functionally equivalent, HP recommends using I/O module SAS port 1. NOTE: Restrictions exist, depending on the controller, storage enclosure, and drive model. For more information, see "External SAS device, controller, drive, and cabling support matrices" (page 77) Devices and quantities MDS600/D6000 storage enclosures: 1 I/O modules: 2 BladeSystem c7000 enclosures: 1 6Gb SAS BL Switches: 1 Server blade types: half-height and full-height Connection details • Switch in interconnect bay 5: ◦ Port 1: to storage drawer 2, primary I/O module, port 1 ◦ Port 5: to storage drawer 1, primary I/O module, port 1 Notes • If sufficient ports on the switch are available, HP recommends connecting an additional cable from the switch to each I/O module, for additional performance. For an example, see "MDS600 and D6000 single domain, high-performance cabling" (page 86). Illustrated configuration examples 85