HP Brio ba300 hp brio ba300, technical reference manual (product description) - Page 21

system features network interface HP 10/100 BT PCI Ethernet Adapter HP 10/100 BT PCI Ethernet Adapter Features LAN Interface • 32 bits PCI 10/100 BT • RJ 45 LAN port Power Management • RWU for ACPI Windows 98, Windows 98 SE, Windows 2000, Windows XP • On Now 1.0; APM 1.2; ACPI 1.0 • PCI 2.2 Manageability • DMI 2.0 Component Code • WfM 2.0 • PXE 2.0 BootROM Diagnostics • Production Diag • MAC address DOS report tool Drivers Windows 95, Windows 98, Windows 2000, Windows NT 4.0, MS-DOS, Novell, Windows PX (embedded) Specifications Network Interface Physical Dimensions • 10 Mbps Ethernet 10BASE-T: Ethernet IEEE 802.3 industry standard for a 10 Mbps baseband CSMA/CD local area network. • 100 Mbps Ethernet 100BASE-TX: Ethernet IEEE 802.3u industry standard for a 100 Mbps baseband CSMA/CD local area network. • Height: 5.3 cm (2.11 in.) • Length: 12 cm (4.72 in.) Boot on LAN The HP BA300 PC can boot on LAN. However, this feature is disabled by default in the BIOS Setup program. For more information, refer to "using the HP setup program" on page 24. LAN connector The 10/100BT connector is located on the rear of the HP BA300 PC. LAN Connector 21