HP C4345 User Guide - Page 101
Remove ink from your skin and clothing, Ink-backup mode
UPC - 883585470938
View all HP C4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Chapter 12 To remove the print cartridge from the print cartridge protector ▲ Press down on the top of the print cartridge protector to release the print cartridge, and then gently remove the print cartridge out of the print cartridge protector. Maintain the HP All-in-One Remove ink from your skin and clothing Follow these instructions to remove ink from your skin and clothing: Surface Skin White fabric Color fabric Remedy Wash the area with an abrasive soap. Wash the fabric in cold water and use chlorine bleach. Wash the fabric in cold water and use sudsy ammonia. CAUTION: Always use cold water to remove ink from fabric. Warm or hot water can set the ink into the fabric. Ink-backup mode Use the ink-backup mode to operate the HP All-in-One with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge cradle. During ink-backup mode, the product can only print jobs from the computer and print received faxes. You cannot initiate a print job from the control panel (such as printing a photo from a memory card). NOTE: When the HP All-in-One operates in ink-backup mode, a message is displayed on the computer. If the message is displayed and two print cartridges are installed in the device, verify that the protective piece of plastic tape has been removed from each print cartridge. When plastic tape covers the print cartridge contacts, the device cannot detect that the print cartridge is installed. This section contains the following topics: • Ink-backup mode output • Exit ink-backup mode 98 Maintain the HP All-in-One