HP C8372A Reference Guide - Page 19

hp digital copier series choose the paper tray and set the paper type If you have installed the optional 250-sheet plain paper tray, it becomes the default paper tray used for copying. To use a type of paper other than plain paper, such as transparency film, load that paper in the main tray. Adjust the settings for paper type to ensure the best quality and specify which paper tray to use. Caution! You must have the two-sided printing accessory installed to use the 250-sheet plain paper tray. When you change copy settings on the front panel, the settings are reset to the defaults two minutes after the unit completes the copy job. HP recommends adjusting paper type settings for the type of paper you're using. 1 Press Tray Select/Paper Type. 2 If you have both paper trays, press Tray Select/Paper Type until the desired paper tray is selected, as indicated by the dot on the left. 3 When copying from the main tray, press paper type appears. until the appropriate 4 Press Enter to choose the displayed paper type. set the paper size To modify paper size: 1 Press Menu. 2 Press 1, then press 2. This selects Copy Setup, then selects Paper Size. 3 If you have the optional 250-sheet paper tray installed, press and to select the upper or lower tray, then press Enter to select. 4 Press until the desired size appears, then press Enter to select it. load paper and originals 13