Home » HP Manuals » Multifunction Devices » HP C8372A » Manual Viewer

HP C8372A Reference Guide - Page 56

set the power save mode time, set the ring and beep volume, Power Save On, Status and Maintenance

Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

hp digital copier series set the power save mode time The bulb in your HP Digital Copier remains on for a specified period so that the unit is immediately ready to respond to your request. When the HP Digital Copier has not been used within that specified period, it turns the bulb off to preserve power and displays Power Save On in the frontpanel display. Tip! You can exit this mode by pressing any button on the front panel. Your unit is automatically set to enter power-save mode after 12 hours. Follow these steps if you want the HP Digital Copier to enter this mode earlier. 1 Press Menu. 2 Press 3, then press 6. This selects the Status and Maintenance menu, then selects the Set Power Save Mode Time option. 3 Press until the desired time appears, then press Enter. set the ring and beep volume The volume of the button beeps on your HP Digital Copier is preset, but you can easily change the volume. 1 Press Menu. 2 Press 3, then press 8. This selects the Status and Maintenance menu, then selects the Ring and Beep Volume option. 3 Press to select Soft, Loud, or Off, then press Enter. 50 maintain your hp digital copier

Section	Page
review the front panel	7
front panel features	7
menu functions	9
menu options	10
get help	11
load originals and paper	13
load originals	13
load originals on the glass	13
load originals in the automatic document feeder	14
avoid paper jams	15
load paper	15
load the main paper tray	15
load the optional 250-sheet plain paper tray	17
recommended paper types	17
papers to avoid	18
tips for loading other types of paper in the main tray	18
choose the paper tray and set the paper type	19
set the paper size	19
use copier features	21
make copies	21
before you begin	21
make a copy	22
increase copy speed or quality	22
reduce or enlarge a copy	22
make copies lighter or darker	23
change color intensity	23
copy using photo mode	23
enhance text sharpness and photo colors	24
set the number of copies	24
change settings for all copy tasks	24
perform special copy jobs	25
copy a photo	25
fit a copy to the page	25
print several copies on one page	26
print two originals on one page	27
shift image to increase the margin	28
make twosided copies	28
collate copies	29
make a poster	29
prepare a color T-shirt transfer	30
create a mirror image copy	31
stop copying	31
copy setup menu options	31
accessories	33
automatic document feeder (ADF)	33
install the ADF	33
install the ADF input tray	34
replace an existing ADF lid	35
use the ADF	35
two-sided printing accessory	35
attach the two- sided printing accessory	35
optional hp 250-sheet plain paper tray	36
assemble the 250-sheet plain paper tray	36
set the paper size	37
load paper in the optional 250-sheet plain paper tray	39
attach the optional 250- sheet plain paper tray to the unit	40
maintain your hpdigital copier	41
clean the glass	41
clean the lid backing	41
clean the exterior	42
maintain printheads and ink cartridges	42
check the ink level	42
handle printheads	42
verify a printhead needs to be replaced	43
replace the printheads	44
handle ink cartridges	46
replace the ink cartridges	47
align the printheads	49
clean the printheads	49
clean the ink cartridge contacts	49
clean the printhead contacts	51
replacement alternatives	52
perform color calibration	53
override the ink level gauge	54
set the country/region or language	55
set the power save mode time	56
set the ring and beep volume	56
maintenance menu options	57
troubleshooting tips	59
paper problems	59
paper jams	59
paper does not feed from the paper tray	61
several pages advance at the same time	61
paper type is not correct or not supported	62
out of paper	62
paper is too narrow or paper size errors	62
failure to copy	62
hp digital copier is not responding	62
hp digital copier fails to power on	64
hp digital copier will not make copies	64
copies do not look right	65
copies are faded, colors are incorrect or dull	65
entire copy is slanted or skewed	66
a blank page came out	66
orientation of copy is wrong	67
colors are bleeding into each other	67
copy has horizontal streaks	67
copy is fuzzy or blurry	68
copy has vertical streaks or is missing vertical lines	68
parts of the original are cut off	68
copies are too light or too dark	70
ink is not filling the text or graphic completely	70
ink cartridge and printhead problems	71
ink cartridges or printheads have problems	71
error message when you insert new ink cartridge or printheads	71
ink cartridge error	72
ink cartridge is low or out of ink	72
ink cartridge is missing, or incorrect cartridge is installed	72
need printhead alignment	73
create a self- test report for cartridges and printheads	73
printhead has failed	74
ink carriage is stalled	74
other copier problems and errors	75
ink is not drying	75
cover or door will not close	75
copier is in factory mode	75
copier is initializing	75
improper power off	75
mechanism error	76
support services and warranty	77
register your product	77
support from the internet	77
hpcustomer support	77
returning your hp digital copier for service	78
call in the U.S. during warranty	80
call elsewhere in the world	80
call in Australia post- warranty	82
hpdistribution center	82
express service	82
limited warranty statement	83
environmental statement	85
hp printhead and ink cartridge limited warranty	85
warranty upgrades	86
limited global warranty statement for hpdigital copier products	86
technical information	89
hpdigital copier series specifications	89
margin specifications	89
paper specifications	90
additional specifications	92
order printheads and ink cartridges	92
additional hpdigital copier accessories	92
environmental product stewardship program	93
protecting the environment	93
ozone production	93
energy consumption	93
paper use	93
plastics	93
material safety data sheets	93
materials that require special handling	93