HP C8372A Reference Guide - Page 35
replace an existing ADF lid, use the ADF, two-sided printing accessory, replace an, existing ADF
![]() |
View all HP C8372A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
replace an existing ADF lid hp digital copier series If you remove the ADF lid for any reason, you can easily replace it. to remove the ADF lid 1 Gently pull the ADF input tray straight out. 2 Open the ADF lid. 3 Pull up both tabs. 4 Remove the ADF lid by gently pulling it slightly forward as you lift. tab above each hinge hinges use the ADF 5 Follow the steps, above, labeled "to install the ADF." 1 Place all originals in the ADF input tray print-side up. 2 Adjust the paper-width guide to fit the size of your original. A message appears on the display indicating that the originals are loaded. two-sided printing accessory This accessory can be used with or without the optional 250-sheet plain paper tray to provide dual-sided copying capability and dual paper tray capacity. The 250-sheet plain paper tray can handle 250 sheets of copier letterhead and bond paper. You must use the main paper tray to load transparency film, photo paper, or other coated stock. Tip! You must have the two-sided printing accessory installed to use the optional 250-sheet plain paper tray. attach the twosided printing accessory 1 Turn the knob on the rear access door of your HP Digital Copier counterclockwise, then remove the door. accessories 29
![](/manual_guide/products/hewlettpackard-c8372a-reference-guide-0c8cb6b/35.png)