HP Color LaserJet CM1015/CM1017 HP Color LaserJet CM1015/CM1017 MFP Series - S - Page 241

● Last Page ● Back Cover To use Use Different Paper/Covers options, you must configure the setting for the print job. Each option for the Use Different Paper/Covers setting is described in the sections that follow this procedure. Use the following instructions to configure the setting. To configure the Use Different Paper/Covers options for a print job For each option, select a different tray from the Source Is: drop-down menu. For some options, the Type is: drop-down menu is also available. 1. To use different paper or cover stock, select the Use Different Paper/Covers check box. A list of options appears in the dialog box. The full set of selections is visible when you use the down arrow button to the right of the list to scroll. 2. To use different media for the pages within the print job, select the appropriate option (Front Cover, First Page, Other Pages, Last Page, or Back Cover) in the dialog box. A check mark appears to the left of the option when you change a setting in the Source is: or Type is: dropdown menus. 3. Click OK to print. NOTE Use the same size of media for the entire print job. All options that you select from the available Use Different Paper/Covers options use the size selected in the First Page settings. When you change the type and source of the paper and covers, the settings remain configured until you close the application software. Each option for the Use Different Paper/Covers setting is described in the following sections, in the order they appear in the pane below the Use Different Paper/Covers check box. Front Cover and Back Cover options Use these options to include a blank or preprinted front cover or back cover on a document. The following figure shows the Front Cover setting and options. These options are the same for the Back Cover setting. HP PCL 6 and PS emulation unidrivers for Microsoft Windows ENWW Paper/Quality tab features 219