HP Color LaserJet CP4005 HP Color LaserJet CP4005 Printer - Software Technical - Page 219

Macintosh To print a configuration page, follow these instructions. i. Press (the select button). ii. Press (the up button) and (the down button) to scroll to INFORMATION, and then press . iii. Press and to scroll to PRINT CONFIGURATION. iv. Press to print the configuration page. d. On the first configuration page, under IPv4, find the IP Address. Type this address into the Address field on the add printer screen. e. The Name, Location, and Print Using information will automatically be filled in. If the HP Color LaserJet CP4005 Series PPD does not appear in the Print Using field, turn the computer off and then on again and restart the setup process. 6. Click Add. The Installable Options screen appears. Figure 6-17 Installable Options screen 7. If the printer has tray 3, change the appropriate tray setting from Not Installed to Installed. 8. If the printer has a duplex unit, select the Duplex Unit check box. (Duplexing is standard on the HP Color LaserJet CP4005dn printer.) 9. After selecting the installable options, click Continue. The printer name appears in the Printer List and the setup is complete. Figure 6-18 Printer List screen Set up a printer with Mac OS X V10.3 1. If you are installing the printer using a USB connection, connect the USB cable between the HP Color LaserJet CP4005 printer and the computer. Turn on the printer. If you are installing using a network connection, verify that the network cable is connected to the printer and the printer is on. ENWW Macintosh install and uninstall instructions 201