HP DC5100 HP Compaq Business Desktop dc5100 Service Reference Guide, 2nd Editi - Page 100
Front I/O Devices, Preparation for Disassembly, Access Panel
UPC - 072000919491
View all HP DC5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.12 Front I/O Devices 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). 2. Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Section 6.3, "Access Panel"). 3. Remove the front I/O panel assembly (Section 6.11, "Front I/O Panel Housing Assembly"). 4. Remove the two screws 1 that hold the USB and audio port assembly in place. 5. Remove the I/O device assembly from the I/O panel 2 by pushing it out of the housing. To install the I/O devices, reverse the removal procedures and then reinstall the housing assembly. 6-22 376220-001 Service Reference Guide, dc5100
6–22
376220-001
Service Reference Guide, dc5100
Removal and Replacement Procedures— Microtower (MT) Chassis
6.12 Front I/O Devices
1. Prepare the computer for disassembly (
Section 6.1, “Preparation for Disassembly”
).
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on (
Section 6.3, “Access Panel”
).
3. Remove the front I/O panel assembly (
Section 6.11, “Front I/O Panel Housing Assembly”
).
4. Remove the two screws
1
that hold the USB and audio port assembly in place.
5. Remove the I/O device assembly from the I/O panel
2
by pushing it out of the housing.
To install the I/O devices, reverse the removal procedures and then reinstall the housing
assembly.