HP DC5100 HP Compaq Business Desktop dc5100 Service Reference Guide, 2nd Editi - Page 146
Power Switch Assembly, Push the two LEDs out of the chassis
UPC - 072000919491
View all HP DC5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Removal and Replacement Procedures- Small Form Factor (SFF) Chassis 7.12 Power Switch Assembly 1. Prepare the computer for disassembly (Section 7.1, "Preparation for Disassembly"). 2. Remove the computer cover (Section 7.4, "Computer Cover"). 3. Disconnect the power switch/LED cable from the system board. 4. Squeeze the switch holder retaining clips together at the front of the chassis 1 and push the switch assembly out of the chassis 2. Push the two LEDs out of the chassis 3. 5. If necessary, the LED holders may also be removed by squeezing the clips and pushing them out of the front of the chassis 4. To install the power switch and LEDs, reverse the removal procedure. 7-34 376220-001 Service Reference Guide, dc5100
7–34
376220-001
Service Reference Guide, dc5100
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
7.12 Power Switch Assembly
1. Prepare the computer for disassembly (
Section 7.1, “Preparation for Disassembly”
).
2. Remove the computer cover (
Section 7.4, “Computer Cover”
).
3. Disconnect the power switch/LED cable from the system board.
4. Squeeze the switch holder retaining clips together at the front of the chassis
1
and push the
switch assembly out of the chassis
2
. Push the two LEDs out of the chassis
3
.
5.
If necessary, the LED holders may also be removed by squeezing the clips and pushing them
out of the front of the chassis
4
.
To install the power switch and LEDs, reverse the removal procedure.