HP DC5100 HP Compaq Business Desktop dc5100 Service Reference Guide, 2nd Editi - Page 150
Speaker, Preparation for Disassembly, Computer Cover, Fan Shroud, Heatsink.
UPC - 072000919491
View all HP DC5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Removal and Replacement Procedures- Small Form Factor (SFF) Chassis 7.15 Speaker 1. Prepare the computer for disassembly (Section 7.1, "Preparation for Disassembly"). 2. Remove the computer cover (Section 7.4, "Computer Cover"). 3. Remove the fan shroud. Section 7.10, "Fan Shroud" 4. Remove the heatsink control cable and the heatsink from the system board (Section 7.13, "Heatsink"). 5. Remove any memory modules that might interfere with the screwdriver used for removing the speaker. 6. Disconnect the speaker wire from the system board. 7. Remove the two screws that secure the speaker to the chassis. 8. Remove the speaker from the chassis. To install the speaker, reverse the removal procedures. Ä CAUTION: Before reinstalling the heatsink you must clean the top of the processor and the bottom of the heatsink with an alcohol pad supplied in the speaker spares kit. After the alcohol has evaporated, apply thermal grease to the top of the processor from the syringe supplied in the speaker spares kit. 7-38 376220-001 Service Reference Guide, dc5100