HP DC5100 HP Compaq Business Desktop dc5100 Service Reference Guide, 2nd Editi - Page 101
Power Switch Assembly
UPC - 072000919491
View all HP DC5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.13 Power Switch Assembly 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). 2. Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Section 6.3, "Access Panel"). 3. Remove the front I/O panel assembly (Section 6.11, "Front I/O Panel Housing Assembly"). 4. Squeeze the switch holder retaining clips together and push the switch assembly out of the front I/O panel housing. 5. Place the switch holder with switch installed into the inside of the front I/O panel housing and position the legs of the retaining clip into the clip slots. Press firmly so that the clips will penetrate the slot openings and latch into place. If one clip will not easily engage, it may be necessary to use the end of a ball point pen (or another thin, stiff object) to compress the clip leg while inserting it into the clip slot. 6. Reconnect the housing assembly to the front of the chassis and reconnect the cables to the system board. Service Reference Guide, dc5100 376220-001 6-23