HP DC5100 HP Compaq Business Desktop dc5100 Service Reference Guide, 2nd Editi - Page 157
Reinstall the system board assembly into the chassis and secure it with the long mounting
UPC - 072000919491
View all HP DC5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Removal and Replacement Procedures- Small Form Factor (SFF) Chassis 2. Install the processor. Ä CAUTION: Before reinstalling a previously used heatsink you must clean the top of the processor and the bottom of the heatsink with the alcohol pad supplied in the spares kit. After the alcohol has evaporated, apply thermal grease to the top of the processor using the syringe supplied in the spares kit. 3. Attach the heatsink to the system board-standoff assembly with the four captive screws. Ä CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly seat the heatsink on the processor. This is especially important as the pins on the socket are very fragile and any damage to them may require replacing the system board. 4. Reinstall the system board assembly into the chassis and secure it with the long mounting screw. Ä CAUTION: When reconnecting the cables it is important that they be positioned so they do not interfere with the sliding of the drive cage or the rotation of the power supply. Service Reference Guide, dc5100 376220-001 7-45