HP Dc5850 Hardware Reference Guide - dc5850 Microtower Models - Page 24
Opening the Slot Cover Lock, Removing an Expansion Slot Cover
UPC - 884962022993
View all HP Dc5850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
6. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis. 7. On the rear of the computer, a slot cover lock secures the expansion card brackets and expansion slot covers in place. Lift up on the tab at the top of the lock and rotate the lock open. Figure 2-8 Opening the Slot Cover Lock 8. Before installing an expansion card, remove the expansion slot cover or the existing expansion card. NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. a. If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside of the chassis. Figure 2-9 Removing an Expansion Slot Cover 18 Chapter 2 Hardware Upgrades ENWW