HP Dc5850 Hardware Reference Guide - dc5850 Microtower Models - Page 26
CAUTION, Securing the Expansion Cards and Slot Covers
UPC - 884962022993
View all HP Dc5850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
9. Store the removed card in anti-static packaging. 10. If you are not installing a new expansion card, install an expansion slot cover to close the open slot. CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation. 11. To install a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis (1) so that the bracket on the card is aligned with the open slot on the rear of the chassis. Press the card straight down into the expansion socket on the system board (2). Figure 2-12 Installing an Expansion Card NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot. 12. Rotate the slot cover lock to the closed position, ensuring that it snaps securely in place. Figure 2-13 Securing the Expansion Cards and Slot Covers 20 Chapter 2 Hardware Upgrades ENWW