HP Dc5850 Hardware Reference Guide - dc5850 Microtower Models - Page 36
Connecting the Diskette Drive Cables
UPC - 884962022993
View all HP Dc5850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
b. If you are installing a diskette drive, connect the data cable (1) and power cable (2) to the back of the drive. Figure 2-25 Connecting the Diskette Drive Cables 5. If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector. NOTE: If you are installing a SATA optical drive, connect the first optical drive to the white SATA connector on the system board labeled SATA1. Connect a second optical drive to the orange SATA connector labeled SATA3. If you are installing a diskette drive, connect it to the connector on the system board labeled FLPY. If installing a media card reader, connect the USB cable from the media card reader to the USB connector on the system board labeled MEDIA. Refer to System Board Drive Connections on page 24 for an illustration of the system board drive connectors. 6. Replace the front bezel and computer access panel. 7. Reconnect the power cord and any external devices, then turn on the computer. 8. Lock any security devices that were disengaged when the access panel was removed. 30 Chapter 2 Hardware Upgrades ENWW