HP Designjet 350c HP Designjet 330 and 350C Plotters - Users Guide - Page 127

Front-panel lights Pattern of lights Explanation and Action Plain + Error The current plot is too large for the plotter's memory. Look on screen for any error message: some drivers, for example the Microsoft Windows driver supplied with your plotter, allow you to choose a different printing mode and try to send the file again. In the case of the Microsoft Windows 95 driver shipped with the plotter, the relevant field is called "Process document" in the Options dialog box. Otherwise, you may need to install more memory to print this plot. For information on available memory expansion modules, see page 10-16. Film The current media selection is Film. For an explanation of which media types this means, see page 2-3. 350C Film + Coated The current media selection is Glossy. For an explanation of which media types this means, see page 2-3. Film + Error Coated Either the black print cartridge is faulty, misplaced or missing. Reseat or replace the cartridge as explained from page 7-2. Or you have loaded a print cartridge of the wrong type for this plotter. For the correct part numbers of the four cartridges supported by this plotter, see page 10-17. The current media selection is Coated. For an explanation of which media types this means, see page 2-3. FRONT-PANEL 8 LIGHTS 8-3