HP Designjet 350c HP Designjet 330 and 350C Plotters - Users Guide - Page 86
Important points about monochrome printing
View all HP Designjet 350c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
350C 330 Controlling your plot's appearance Printing color drawings in monochrome Important points about monochrome printing The monochrome plot will render colors as grayscales. If you want your plot printed in only black and white, then you should set all your logical pens to black, either in your software (easily achieved in CAD software by using a pen number that is 100% black) or in the Setup Sheet (see page 3-12). With monochrome plotting, you have the option to choose between 300 and 600 dpi resolution (see page 3-15). - With the HP DesignJet 350C, the resolution on glossy media is always 300 dpi. This is because, with the Glossy media type selected, all printing is performed using the cyan, yellow and magenta cartridges; the black cartridge is not used. - With the HP DesignJet 330, glossy media is not supported. 3-14