HP Designjet 350c HP Designjet 330 and 350C Plotters - Users Guide - Page 19

SETUP 1 Setting up your plotter Task 1: Check that you have all the items required Not supplied 3 You will also need the following items, which were not supplied with the plotter. Interface cable For details of suitable cables, see page 10-11. Media For details of supported media types, see page 2-3. As part of the setup routine, you may need up to three A-size or A4-size sheets, plus whatever size sheet you prefer for a sample plot. If you have fitted the optional roll-feed assembly, you can use either roll media or cut sheets; if not, you can use only cut sheets. Optional 4 If you have bought one, you will also need your: Memory expansion module For details of the memory expansion modules available, see page 10-16. HP JetDirect EX print server This is required if you intend to connect your plotter directly to a network. For details of the latest HP JetDirect EX products, contact your local HP Sales and Support Office. For configuration details, see page 1-18. 1-5