HP Deskjet 1200c HP Photo Scanner 1200 - (English) User Manual - Page 31
error messages, Replace the USB cable. Use
View all HP Deskjet 1200c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
chapter 8 Problem Possible causes Windows: When I connect the scanner to my Windows computer and press the Scan button, there is no scanning progress dialog. The software did not install properly. Solution Restart the computer. If the problem still exists, reinstall the software. error messages You might receive error messages on the scanner's front panel display or on the computer screen. Error code or message Possible cause Solution On the scanner: 000 blinks as the number of photos remaining. Insufficient memory The memory card is full. Either insert a different memory card or download and remove the images on the memory card. On the scanner: E00 blinks as the number of photos remaining. Memory card is not formatted • Format the memory card: correctly, no memory card press and hold the Quality found, or memory card is defective. button, then press the Scan button. The indicator light will flash while the card is being formatted. • Replace the memory card if E00 continues to flash after attempting to format it. On the scanner: E01 blinks as the number of photos remaining. USB port is not supplying the Connect to a USB port on the necessary power. computer rather than a hub. On the scanner: E02 or higher blinks as the number of photos remaining. On the computer: Connection between the imaging device and computer failed. Self-test failed. Call HP Customer Care. Bad USB cable or connection. • Replace the USB cable. Use only the HP-supplied cable. • Check the USB connection. • Try a different USB port. 30 hp photo scanner 1200