HP Deskjet 200cci HP DeskJet 420 Series Printer Users Guide - C2642-90066 - Page 6

5. Insert the inkjet print cartridge into the holder at an angle such that the green top is tilted toward you. The arrow on the top of the inkjet print cartridge should be pointing toward the inside of the printer. 2642014 6. Push the green top in until the inkjet print cartridge snaps into place. 2642015 7. Close the printer door. 8. Press the Change Cartridge button ( ). Note: If you did not install a recommended inkjet print cartridge, the print cartridge holder will move back to the loading position, and the Change Cartridge light will continue to blink. CAUTION: The ink in the inkjet print cartridge has been carefully formulated by Hewlett-Packard to ensure superior print quality and compatibility with your printer. Damage to the printer or the inkjet print cartridge resulting from modifying or refilling the inkjet print cartridge is not the responsibility of Hewlett-Packard. STEP 5: Installing the Printer Software In a Windows Environment To install the printer software, first refer to page 17, "Hardware Compatibility" for hardware requirements. Note: The HP DeskJet 420 series printer is not supported in network configuration. Before you can use your printer, you must install the printer software. 1. Perform all procedures given earlier in this section. 2. Turn on the printer, then turn on the computer. 3. Close any screen saver or other software programs that are open and running in the background on your computer. To close software programs, follow these steps: • For Windows 95 or 98 - Right-click the software program's name or icon on the taskbar. Select Close. Repeat these steps for each open software program, except Windows Explorer. • For Windows 3.1x - While holding down the Alt key, press the Tab key to locate an open software program. When you locate an open software program, release both keys. In the File menu, select Exit. Repeat these steps for each open software program, except Program Manager. Windows 95 or 98: To install the Windows 95 or 98 printer software, use the following procedure: 1. Start Microsoft Windows 95 or 98. 2. Windows should recognize the attached printer as a newly added piece of hardware and walk you through the installation instructions. If a screen with instructions does not appear, do the following: 3. Click on the Start button. 4. Choose Settings in the Start menu. 5. Click Printers in the Settings menu. 6. Double-click Add Printer in the Printers window. 4