HP Desktop Pro A G2 Maintenance and Service Guide - Page 19
Routine care, General cleaning safety precautions, Cleaning the computer case
View all HP Desktop Pro A G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
● Never cover the ventilation slots on the monitor with any type of material. ● Install or enable power management functions of the operating system or other software, including sleep states. Routine care General cleaning safety precautions 1. Never use solvents or flammable solutions to clean the computer. 2. Never immerse any parts in water or cleaning solutions; apply any liquids to a clean cloth and then use the cloth on the component. 3. Always unplug the computer when cleaning with liquids or damp cloths. 4. Always unplug the computer before cleaning the keyboard, mouse, or air vents. 5. Disconnect the keyboard before cleaning it. 6. Wear safety glasses equipped with side shields when cleaning the keyboard. Cleaning the computer case Follow all safety precautions in General cleaning safety precautions on page 11 before cleaning the computer. To clean the computer case, follow the procedures described below: ● To remove stains or dirt, use one of the following: - Alcohol-free glass-cleaning fluid - Solution of water and mild soap - Dry microfiber cleaning cloth or a chamois (static-free cloth without oil) - Static-free cloth wipes ● For stronger stains, use a mild dishwashing liquid diluted with water. Rinse well by wiping the surface with a cloth or swab dampened with clear water. CAUTION: Avoid strong cleaning solvents or germicidal wipes that can permanently damage your computer. If you are not sure that a cleaning product is safe for your computer, check the product contents to make sure that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the product. ● For stubborn stains, use isopropyl (rubbing) alcohol. No rinsing is needed because the alcohol will evaporate quickly and not leave a residue. ● After cleaning, always wipe the unit with a clean, lint-free cloth. ● Periodically clean air vents on bezel and power supply. Also clean the internal chassis fans, heat sink fans, and GPU fans (if present). For information about accessing internal components, see Removal and replacement procedures on page 16. Dirty vents and fans can contribute to overheating, which leads to shortened product life. CAUTION: To reduce the risk of damage to computer components due to static discharge, do not use a vacuum to remove debris. Routine care 11